Phone: +86 0417-5216222 5213988
Fax: +86 0417-5216222
Mobile: +86 18341726777
President Gao: +86 18341739898
Address: East of West Outer Ring, Coastal Emerging Industrial Zone, Dashiqiao City, Yingkou
Brief introduction of the dust collector of the dust removal equipment manufacturer of the wooden door factory; the dust collector of the wooden door factory is mainly composed of the upper box, the middle box, the ash hopper, the air inlet pipe, the support filter bag, the blowing device, and the ash discharge device. The dust-containing gas enters the ash hopper of each branch from the air inlet pipe of the dust collector, and under the guide of the ash diversion device, the large-particle dust is separated and falls directly into the ash hopper, while the finer dust enters uniformly The middle box is absorbed on the outer surface of the filter bag, and the clean gas passes through the filter bag and enters the upper box, and is discharged into the atmosphere through each off-line valve and exhaust pipe.
Wood door factory dust collector features:
1. The dust collector of Mumen Factory adopts a gradual air flow channel design to ensure the uniform distribution of air flow, so that the dust cleaning compressed air can be uniformly sprayed and filtered by all filter bags, and the overall life of the filter bag is improved.
2. The dust collector of Mumen Factory is based on the hydrophilic characteristics of wood dust. There is a possibility that the inner frame of the dust collector's hopper is arched to cause a blocking phenomenon. The dust collector's hopper is designed with a vibrator to assist dust removal and reduce manual assistance Clean work.