节能环保设备

Categories of news

Product Categories

contact us

Phone: +86 0417-5216222 5213988

Fax: +86 0417-5216222

Mobile: +86 18341726777

President Gao: +86 18341739898

Website: www.ykgrhb.com

Website: en.ykgrhb.com

Address: East of West Outer Ring, Coastal Emerging Industrial Zone, Dashiqiao City, Yingkou


How to deal with the dust of the bag filter

Your current location: Home >> News >> technical knowledge

How to deal with the dust of the bag filter

Date of release:2018-07-29 Author: Click:

The bag dust collector manufacturer tells you that the bag is clogged, which increases the resistance. The environmental protection dust removal equipment can be seen from the reading of the differential pressure gauge. Clogged bag is the main cause of the bag wear, perforation, and shedding. You can do the following Maintenance work, adjust installation and operating conditions, temporarily strengthen dust removal, to eliminate clogging of the bag, and replace the bag partially or completely. Measures to prevent clogging of the dust bag, soak the bag, and then check whether the dust collector box and other parts are leaking, then eliminate the leak, dry, and repeatedly clean the dust.

The aging of cloth bags is mainly caused by the following reasons.

1. Reaction with water

2. Contact reaction with acid, alkali or solvent vapor

3. The filter cloth should not be hung too loose or too tight, too loose can easily accumulate dust, too tight can easily be damaged

4. After replacing the cloth bag, blow it with compressed air first, and then check for broken holes. After repairing the broken holes, leave them for replacement. If the cloth bag is covered with dust, rinse it with water and leave it to be replaced after it is dried.

5. Hardening and shrinkage due to abnormal high temperature

6. New technology and old cloth bags should not be mixed to avoid different damage time and affect the normal operation of dust removal equipment



The address of this article:http://en.ykgrhb.com/news/386.html

Key word: