Phone: +86 0417-5216222 5213988
Fax: +86 0417-5216222
Mobile: +86 18341726777
President Gao: +86 18341739898
Address: East of West Outer Ring, Coastal Emerging Industrial Zone, Dashiqiao City, Yingkou
The single machine dust remover has unique advantages such as economy and practicality, compact and close structure, easy installation and convenient protection. It is mainly used for some discharge points and dust points of various warehouse tops, warehouse bottoms, warehouse tops and various transportation facilities. Remove dust and purify. At the same time, the stand-alone dust removal device can also be suitable for installation in the workshop and facilities, and can also be installed outside the environmental protection dust removal equipment in the room.
The single-unit dust collector is widely used to remove non-fibrous dust and industrial dust from various industrial and mining companies such as metal smelting, building materials, machinery, chemical industry, and mining. If it is used for coal dust and other combustible dusts, it is necessary to add defensive combustion and explosion-proof treatment methods, and the structure of the single dust collector must be changed accordingly.
The stand-alone dust collector is a kind of filter type dust collector, which is a device that separates and collects the dust through the filter material. This device mainly uses fiber fabric as filter material, which is commonly used in the dust removal of industrial exhaust gas. Its dust removal efficiency can generally reach more than 99%. Although it is one of the oldest methods of dust removal, it is more and more widely used because of its high efficiency, stable and reliable performance, and simple operation.
After the dust-containing gas of the single-unit dust collector enters the single-unit, the dust passes through two-stage filtration. First, the air velocity is reduced and the direction of the airflow is changed, so that the large-particle dust settles in the dust box due to gravity and inertness. For the product, it falls into the user's silo, hopper and other equipment; the lighter and finer dust is retained by the filter bag on the wall of the bag, and the cleaned clean air is sent back to the workshop by centrifugal force, thereby reducing heat loss.
The biggest advantage of the stand-alone dust collector is that it has a very strong dust removal effect, which can remove the dust that we can't see with the naked eye, so that we can avoid the damage caused by the dust, and the stand-alone dust collector is very quiet when used, giving us Has created a very good living environment.
The single machine dust collector is designed for the top and bottom of the cement plant. It is designed for belt conveying and dust removal of local dust sources. It can also be used to remove dust from local dust sources in other industries. It has the advantages of small volume, large air volume, compact structure, convenient and reliable use.
The stand-alone dust collector is very compact in design, so it does not occupy too much area, and this design is also helpful for maintenance, helping customers completely remove dust and save a lot of time.
The single-unit dust collector avoids the defects of insufficient cleaning strength and manual operation when cleaning, so the scope of use is expanded. Because the structure of the single-unit dust collector has certain characteristics, the efficiency of dust collection is improved and the single-unit dust collector is extended. The use time of the device.
If the excessive discharge of the stand-alone dust collector only occurs after cleaning the filter bag, you only need to check whether the pressure of the compressed air for pulse cleaning is too high. The reduction of dust load may come from the reduction of productivity, or it is caused by the maintenance and adjustment of the control system of the dust collector. The solution: you can start slowly with a light load or use the method of pre-coated dust.